Engineering Graphics with SOLIDWORKS 2015 and Video Instruction

Author: David Planchard

Publisher: SDC Publications

ISBN: 1585039268

Category: Computers

Page: 550

View: 8623

Engineering Graphics with SOLIDWORKS 2015 and video instruction is written to assist the technical school, two year college, four year university instructor/student or industry professional that is a beginner or intermediate SOLIDWORKS user. The book combines the fundamentals of engineering graphics and dimensioning practices with a step-by-step project based approach to learning SOLIDWORKS with video instructions. Learn by doing, not just by reading. The book is divided into four sections: Chapters 1 - 3 explore the history of engineering graphics, manual sketching techniques, orthographic projection, Third vs. First angle projection, multi-view drawings, dimensioning practices (ASME Y14.5-2009 standard), line type, fit type, tolerance, fasteners in general, general thread notes and the history of CAD leading to the development of SOLIDWORKS. Chapters 4 - 9 explore the SOLIDWORKS User Interface and CommandManager, Document and System properties, simple machine parts, simple and complex assemblies, proper design intent, design tables, configurations, multi-sheet, multi-view drawings, BOMs, and Revision tables using basic and advanced features. Follow the step-by-step instructions in over 80 activities to develop eight parts, four sub-assemblies, three drawings and six document templates. Chapter 10 provides a section on the Certified Associate - Mechanical Design (CSWA) program with sample exam questions and initial and final SOLIDWORKS models. Chapter 11 provides a section on Additive Manufacturing (3D printing) and its benefits and features. Understand the terms and technology used in low cost 3D printers. Review individual features, commands, and tools using the video instruction and SOLIDWORKS Help. The chapter exercises analyze and examine usage competencies based on the chapter objectives. The book is designed to complement the SOLIDWORKS Tutorials located in the SOLIDWORKS Help menu. Desired outcomes and usage competencies are listed for each project. Know your objectives up front. Follow the step-by step procedures to achieve your design goals. Work between multiple documents, features, commands, and properties that represent how engineers and designers utilize SOLIDWORKS in industry. The author developed the industry scenarios by combining his own industry experience with the knowledge of engineers, department managers, vendors, and manufacturers. These professionals are directly involved with SOLIDWORKS every day. Their responsibilities go far beyond the creation of just a 3D model.
Release

Engineering Design with SOLIDWORKS 2018 and Video Instruction

Author: David Planchard

Publisher: SDC Publications

ISBN: 1630571474

Category: Computers

Page: 896

View: 6251

Engineering Design with SOLIDWORKS 2018 and video instruction is written to assist students, designers, engineers and professionals. The book provides a solid foundation in SOLIDWORKS by utilizing projects with step-by-step instructions for the beginner to intermediate SOLIDWORKS user featuring machined, plastic and sheet metal components. Desired outcomes and usage competencies are listed for each project. The book is divided into five sections with 11 projects. Project 1 - Project 6: Explore the SOLIDWORKS User Interface and CommandManager, Document and System properties, simple and complex parts and assemblies, proper design intent, design tables, configurations, multi-sheet, multi-view drawings, BOMs, and Revision tables using basic and advanced features. Additional techniques include the edit and reuse of features, parts, and assemblies through symmetry, patterns, configurations, SOLIDWORKS 3D ContentCentral and the SOLIDWORKS Toolbox. Project 7: Understand Top-Down assembly modeling and Sheet Metal parts. Develop components In-Context with InPlace Mates, along with the ability to import parts using the Top-Down assembly method. Convert a solid part into a Sheet Metal part and insert and apply various Sheet Metal features. Project 8 - Project 9: Recognize SOLIDWORKS Simulation and Intelligent Modeling techniques. Understand a general overview of SOLIDWORKS Simulation and the type of questions that are on the SOLIDWORKS Simulation Associate - Finite Element Analysis (CSWSA-FEA) exam. Apply design intent and intelligent modeling techniques in a sketch, feature, part, plane, assembly and drawing. Project 10: Comprehend the differences between additive and subtractive manufacturing. Understand 3D printer terminology along with a working knowledge of preparing, saving, and printing CAD models on a low cost printer. Project 11: Review the Certified Associate - Mechanical Design (CSWA) program. Understand the curriculum and categories of the CSWA exam and the required model knowledge needed to successfully take the exam. The author developed the industry scenarios by combining his own industry experience with the knowledge of engineers, department managers, vendors and manufacturers. These professionals are directly involved with SOLIDWORKS every day. Their responsibilities go far beyond the creation of just a 3D model.
Release

Engineering Graphics with SOLIDWORKS 2018 and Video Instruction

Author: David Planchard

Publisher: SDC Publications

ISBN: 1630571520

Category: Computers

Page: 576

View: 4458

Engineering Graphics with SOLIDWORKS 2018 and Video Instruction is written to assist students, designers, engineers and professionals who are new to SOLIDWORKS. The book is divided into four sections: Chapters 1 - 3 explore the history of engineering graphics, manual sketching techniques, orthographic projection, Third vs. First angle projection, multi-view drawings, dimensioning practices (ASME Y14.5-2009 standard), line type, fit type, tolerance, fasteners in general, general thread notes and the history of CAD leading to the development of SOLIDWORKS. Chapters 4 - 9 explore the SOLIDWORKS User Interface and CommandManager, Document and System properties, simple machine parts, simple and complex assemblies, proper design intent, design tables, configurations, multi-sheet, multi-view drawings, BOMs, and Revision tables using basic and advanced features. Follow the step-by-step instructions in over 80 activities to develop eight parts, four sub-assemblies, three drawings and six document templates. Chapter 10 provides a section on the Certified Associate - Mechanical Design (CSWA) program with sample exam questions and initial and final SOLIDWORKS models. Chapter 11 helps you understand the differences between additive and subtractive manufacturing. Comprehend 3D printer terminology along with a working knowledge of preparing, saving, and printing a 3D CAD model on a low cost printer. Review individual features, commands, and tools using the video instruction and SOLIDWORKS Help. The chapter exercises analyze and examine usage competencies based on the chapter objectives. The book is designed to complement the SOLIDWORKS Tutorials located in the SOLIDWORKS Help menu. Desired outcomes and usage competencies are listed for each project. Know your objectives up front. Follow the step-by step procedures to achieve your design goals. Work between multiple documents, features, commands, and properties that represent how engineers and designers utilize SOLIDWORKS in industry. The author developed the industry scenarios by combining his own industry experience with the knowledge of engineers, department managers, vendors, and manufacturers. These professionals are directly involved with SOLIDWORKS every day. Their responsibilities go far beyond the creation of just a 3D model.
Release

SOLIDWORKS 2018 Tutorial with Video Instruction

Author: David Planchard

Publisher: SDC Publications

ISBN: 1630571563

Category: Computers

Page: 646

View: 3698

SOLIDWORKS 2018 Tutorial with video instruction is written to assist students, designers, engineers and professionals who are new to SOLIDWORKS. The text provides a step-by-step, project based learning approach. It also contains information and examples on the five categories, to take and understand the Certified Associate - Mechanical Design (CSWA) exam. The book is divided into four sections. Chapters 1 - 5 explore the SOLIDWORKS User Interface and CommandManager, Document and System properties, simple and complex parts and assemblies, proper design intent, design tables, configurations, multi-sheet, multi-view drawings, BOMs, and Revision tables using basic and advanced features. In chapter 6 you will create the final robot assembly. The physical components and corresponding Science, Technology, Engineering and Math (STEM) curriculum are available from Gears Educational Systems. All assemblies and components for the final robot assembly are provided. Chapters 7 - 10 prepare you for the Certified Associate - Mechanical Design (CSWA) exam. The certification indicates a foundation in and apprentice knowledge of 3D CAD and engineering practices and principles. Chapter 11 covers the benefits of additive manufacturing (3D printing), how it differs from subtractive manufacturing, and its features. You will also learn the terms and technology used in low cost 3D printers. Follow the step-by-step instructions and develop multiple assemblies that combine over 100 extruded machined parts and components. Formulate the skills to create, modify and edit sketches and solid features. Learn the techniques to reuse features, parts and assemblies through symmetry, patterns, copied components, apply proper design intent, design tables and configurations. Learn by doing, not just by reading. Desired outcomes and usage competencies are listed for each chapter. Know your objective up front. Follow the steps in each chapter to achieve your design goals. Work between multiple documents, features, commands, custom properties and document properties that represent how engineers and designers utilize SOLIDWORKS in industry.
Release

SolidWorks 2016 Reference Guide

A comprehensive reference guide with over 250 standalone tutorials

Author: David Planchard

Publisher: SDC Publications

ISBN: 1585039896

Category: Computers

Page: 992

View: 2282

The SOLIDWORKS 2016 Reference Guide is a comprehensive reference book written to assist the beginner to intermediate user of SOLIDWORKS 2016. SOLIDWORKS is an immense software package, and no one book can cover all topics for all users. This book provides a centralized reference location to address many of the tools, features and techniques of SOLIDWORKS 2016. This book covers the following: System and Document propertiesFeatureManagersPropertyManagersConfigurationManagersRenderManagers2D and 3D Sketch toolsSketch entities3D Feature toolsMotion StudySheet MetalMotion StudySolidWorks SimulationPhotoView 360Pack and Go3D PDFsIntelligent Modeling techniques3D printing terminology and more Chapter 1 provides a basic overview of the concepts and terminology used throughout this book using SOLIDWORKS 2016 software. If you are completely new to SOLIDWORKS, you should read Chapter 1 in detail and complete Lesson 1, Lesson 2 and Lesson 3 in the SOLIDWORKS Tutorials. If you are familiar with an earlier release of SOLIDWORKS, you still might want to skim Chapter 1 to become acquainted with some of the commands, menus and features that you have not used; or you can simply jump to any section in any chapter. Each chapter provides detailed PropertyManager information on key topics with individual stand-alone short tutorials to reinforce and demonstrate the functionality and ease of the SOLIDWORKS tool or feature. The book provides access to over 240 models, their solutions and additional support materials. Learn by doing, not just by reading. Formulate the skills to create, modify and edit sketches and solid features. Learn the techniques to reuse features, parts and assemblies through symmetry, patterns, copied components, design tables, configurations and more. The book is designed to compliment the Online Tutorials and Online Help contained in SOLIDWORKS 2016. The goal is to illustrate how multiple design situations and systematic steps combine to produce successful designs. The author developed the tutorials by combining his own industry experience with the knowledge of engineers, department managers, professors, vendors and manufacturers. He is directly involved with SOLIDWORKS every day and his responsibilities go far beyond the creation of just a 3D model.
Release

SOLIDWORKS 2018 Quick Start with Video Instruction

Author: David Planchard

Publisher: SDC Publications

ISBN: 1630571431

Category: Computers

Page: 268

View: 7299

SOLIDWORKS 2018 Quick Start with video instruction introduces the new user to the basics of using SOLIDWORKS 3D CAD software in five easy lessons. This book is intended for the student or designer that needs to learn SOLIDWORKS quickly and effectively for senior capstone, machine design, kinematics, dynamics, and other engineering and technology projects that use SOLIDWORKS as a tool. Engineers in industry are expected to have SOLIDWORKS skills for their company’s next project. Students need to learn SOLIDWORKS without taking a formal CAD course. Based on years of teaching SOLIDWORKS to engineering students, SOLIDWORKS 2018 in 5 Hours concentrates on the areas where the new user improves efficiency in the design modeling process. By learning the correct SOLIDWORKS skills and file management techniques, you gain the most knowledge in the shortest period of time. You develop a mini Stirling Engine and investigate the proper design intent and constraints. The mini Stirling Engine is based on the external combustion, closed cycle engine of Scottish inventor Robert Stirling. In addition to 3D modeling, the engine can be used to teach and connect many engineering and physics principles. You begin with an overview of SOLIDWORKS and the User Interface (UI), its menus, toolbars and commands. With a quick pace, you learn the essentials of 2D sketching, part and assembly creation, perform motion study, develop detailed part and assembly drawings and much more.
Release

Engineering & Computer Graphics Workbook Using SOLIDWORKS 2018

Author: Ronald Barr,Davor Juricic,Thomas Krueger

Publisher: SDC Publications

ISBN: 1630571423

Category: Computers

Page: 256

View: 6762

Engineering & Computer Graphics Workbook Using SOLIDWORKS 2018 is an exercise-based workbook that uses step-by-step tutorials to cover the fundamentals of SOLIDWORKS 2018. The intended audience is college undergraduate engineering majors, but it could also be used in pre-college introductory engineering courses or by self learners. The text follows an educational paradigm that was researched and developed by the authors over many years. The paradigm is based on the concurrent engineering approach to engineering design in which the 3-D solid model data serves as the central hub for all aspects of the design process. The workbook systematically instructs the students to develop 3-D models using the rich tools afforded in SOLIDWORKS. The exercises then proceed to instruct the students on applications of the solid model to design analysis using finite elements, to assembly modeling and checking, to kinematic simulation, to rapid prototyping, and finally to projecting an engineering drawing. The workbook is ideally suited for courses in which a reverse engineering design project is assigned. This book contains clear and easy to understand instructions that enable the students to robustly learn the main features of SOLIDWORKS, with little or no instructor input.
Release

Project Based SOLIDWORKS 2016

Author: Kirstie Plantenberg

Publisher: SDC Publications

ISBN: 1630571369

Category: Computers

Page: 326

View: 4473

Project Based SOLIDWORKS is specifically designed to complement an engineering graphics course. It covers how to apply engineering graphics concepts, such as part prints, section views, assembly drawings, tolerancing and fasteners. It also extends these topics into the world of design. Project Based SOLIDWORKS takes a specific part or assembly and teaches you how to model each part and its configurations, create part prints including assembly drawings if appropriate, and takes it one step further and teaches concepts such as FEA, tolerancing, and parametric design. This book comes with instructional videos showing you how to perform each of the tutorials. It also comes with instructional videos showing how to complete each problem in the book. The exception to this is when a problem is open ended and each student will get different results. After completing all the tutorials in this book, you will be able to design moderately difficult parts and assemblies in a realistic manner. This book is perfect for a freshman design class that wishes to include realistic design problems within their curriculum. Structure Project Based SOLIDWORKS is arranged in projects. For example, Chapter two deals with the modeling of a Connecting Rod, Chapter three continues with the connecting rod to introduce the concept of configurations, Chapter four creates a part print of the connecting rod, and Chapter five wraps up the project by performing a static FEA on the connecting rod. At the beginning of each chapter a list of prerequisite tutorials or knowledge is listed. You do not necessarily need to complete the tutorials within the book in order, but make sure that you have the prerequisite knowledge before you begin.
Release

3D-Druck für Dummies

Author: Kalani Kirk Hausman,Richard Horne

Publisher: John Wiley & Sons

ISBN: 3527687661

Category: Computers

Page: 359

View: 3055

Dem 3D-Druck gehört die Zukunft und somit all jenen, die sich jetzt schon damit beschäftigen und entsprechende Geschäftsideen entwickeln. Kalani K. Hausman und Richard Horne liefern Ihnen dafür alle Informationen, die Sie brauchen: angefangen bei den unterschiedlichen Typen von 3D-Druckern über die verschiedenen Methoden des Modellentwurfs mittels Software, 3D-Scanner oder Photogrammetrie bis zu den Materialien wie Plastik, Beton, Wachs, Glas, Metall oder Schokolade. Lernen Sie die vielfältigen Einsatzmöglichkeiten des 3D-Drucks kennen, ob im medizinischen Bereich (künstliche Organe, Prothesen), in der Herstellung von Waren wie Kleidung, Spielzeug und Möbeln oder sogar in der Lebensmittelindustrie. Drucken Sie Prototypen Ihres Produkts, um es vor der Produktion zu perfektionieren, und bauen Sie Ihren eigenen sich selbst druckenden 3D-Drucker!
Release

Engineering Design with SOLIDWORKS 2019

Author: David Planchard

Publisher: SDC Publications

ISBN: 1630572233

Category: Computers

Page: 816

View: 3705

Engineering Design with SOLIDWORKS 2019 is written to assist students, designers, engineers and professionals. The book provides a solid foundation in SOLIDWORKS by utilizing projects with step-by-step instructions for the beginner to intermediate SOLIDWORKS user featuring machined, plastic and sheet metal components. Desired outcomes and usage competencies are listed for each project. The book is divided into five sections with 11 projects. Project 1 - Project 6: Explore the SOLIDWORKS User Interface and CommandManager, Document and System properties, simple and complex parts and assemblies, proper design intent, design tables, configurations, multi-sheet, multi-view drawings, BOMs, and Revision tables using basic and advanced features. Additional techniques include the edit and reuse of features, parts, and assemblies through symmetry, patterns, configurations, SOLIDWORKS 3D ContentCentral and the SOLIDWORKS Toolbox. Project 7: Understand Top-Down assembly modeling and Sheet Metal parts. Develop components In-Context with InPlace Mates, along with the ability to import parts using the Top-Down assembly method. Convert a solid part into a Sheet Metal part and insert and apply various Sheet Metal features. Project 8 - Project 9: Recognize SOLIDWORKS Simulation and Intelligent Modeling techniques. Understand a general overview of SOLIDWORKS Simulation and the type of questions that are on the SOLIDWORKS Simulation Associate - Finite Element Analysis (CSWSA-FEA) exam. Apply design intent and intelligent modeling techniques in a sketch, feature, part, plane, assembly and drawing. Project 10: Comprehend the differences between additive and subtractive manufacturing. Understand 3D printer terminology along with a working knowledge of preparing, saving, and printing CAD models on a low cost printer. Project 11: Review the Certified SOLIDWORKS Associate (CSWA) program. Understand the curriculum and categories of the CSWA exam and the required model knowledge needed to successfully take the exam. The author developed the industry scenarios by combining his own industry experience with the knowledge of engineers, department managers, vendors and manufacturers. These professionals are directly involved with SOLIDWORKS every day. Their responsibilities go far beyond the creation of just a 3D model.
Release

Flame Hardening

Author: Hans Wilhelm Grönegress

Publisher: Springer Science & Business Media

ISBN: 3642867219

Category: Technology & Engineering

Page: 64

View: 9860

This book intended for shop use tries to familiarize the reader with the peculiari ties of a hardening method which due to its many advantages is now in use,many shops. A general knowledge of the principles of hardening and heat treating is presumed. Introduction 1. The name of the process. Flame hardening is a method derived from the old quench hardening and is used for the surface hardening of heat treatable steels. Flame hardening is so named in analogy to flame cutting as the use of a flame is a distinctive feature of this process as opposed to the use of a furnace. 2. Characteristics of flame hardening. In flame hardening the area to be 6 hardened is heated with a burner of large heat capacity (approx. 0.5 · 10 kcaljhr/ meter of flame lengths or 50,000 BTUfhr/inch of flame length) supplied with a mixture of fuel gas and oxygen. The hardening temperature is thus reached in so short a time at the surface that a heat jam is created, that is, more heat is supplied to the surface than can be dissipated to the interior of the workpiece. As the querr ehing takes place immediately after the heating the penetration of the heat to greater depth is prevented and only the outer layer subject to wear is hardened. The core of the workpiece remains unaffected by this heat treatment in cantrast to the other hardening methods where the entire piece is through heated in a furnace.
Release

Materialwissenschaften und Werkstofftechnik

Eine Einführung

Author: William D. Callister,David G. Rethwisch

Publisher: John Wiley & Sons

ISBN: 3527330070

Category:

Page: 906

View: 5781

Der 'Callister' bietet den gesamten Stoff der Materialwissenschaften und Werkstofftechnik für Studium und Prüfungsvorbereitung. Hervorragend aufbereitet und in klarer, prägnanter Sprache wird das gesamte Fachgebiet anschaulich dargestellt. Das erprobte didaktische Konzept zielt ab auf 'Verständnis vor Formalismus' und unterstützt den Lernprozess der Studierenden: * ausformulierte Lernziele * regelmäßig eingestreute Verständnisfragen zum gerade vermittelten Stoff * Kapitelzusammenfassungen mit Lernstoff, Gleichungen, Schlüsselwörtern und Querverweisen auf andere Kapitel * durchgerechnete Beispiele, Fragen und Antworten sowie Aufgaben und Lösungen * Exkurse in die industrielle Anwendung * an den deutschen Sprachraum angepasste Einheiten und Werkstoffbezeichnungen * durchgehend vierfarbig illustriert * Verweise auf elektronisches Zusatzmaterial Der 'Callister' ist ein Muss für angehende Materialwissenschaftler und Werkstofftechniker an Universitäten und Fachhochschulen - und ideal geeignet für Studierende aus Physik, Chemie, Maschinenbau und Bauingenieurwesen, die sich mit den Grundlagen des Fachs vertraut machen möchten.
Release

FEM-Praxis mit SolidWorks

Simulation durch Kontrollrechnung und Messung verifizieren

Author: Michael Brand

Publisher: Springer-Verlag

ISBN: 3658093870

Category: Technology & Engineering

Page: 187

View: 5219

Die Bedeutung von Simulationsprogrammen in der Produktentwicklung nimmt ständig zu. Dieses Buch zeigt Studenten und Praktikern anhand von verschiedenen Beispielen, wie man SolidWorks Simulation effizient im Berechnungs- und Produktentwicklungsprozess einsetzen kann. Der Leser lernt die FEM-Grundlagen und die Bedienung von SolidWorks Simulation kennen. Jede FEM-Analyse wird mit einer ausführlichen analytischen Berechnung verifiziert, damit der Anwender Sicherheit beim Einsatz dieser Software erlangt. Die aktuelle 3. Auflage wurde auf SolidWorks 2016 angepasst. Auf der Verlagsseite im Internet können beim Buch die CAD-Modelle aller Beispiele in den Versionen 2013 und 2016 heruntergeladen werden. Weitere Übungsbeispiele, weiterführende Themen und die eingerichteten Studien (die Simulationen müssen nur noch ausgeführt werden) für die Beispiele im Buch finden sich auf der Homepage des Autors.
Release

Konstruieren mit SolidWorks

Author: Harald Vogel

Publisher: Carl Hanser Verlag GmbH Co KG

ISBN: 3446454500

Category: Technology & Engineering

Page: 512

View: 662

Das vorliegende Buch ist sowohl ein Einstieg in die virtuelle 3D-Konstruktion - das MCAD - als auch eine Einführung in das Programmpaket SolidWorks. Es ist in erster Linie zum Allein-studium gedacht, kann aber auch schulungs- und studienbegleitend sowie als Nachschlagewerk verwendet werden. 13 ausführliche Workshops mit steigendem Schwierigkeitsgrad behandeln das Zusammenspiel von 2D und 3D und die vielfältigen Konstruktionsmöglichkeiten der Software. Zur Konstruktion wurde SolidWorks 2017 verwendet, die Beispiele lassen sich jedoch auch mit den Vorgängerversionen aufbauen. Der Leser erlernt zunächst die fachgerechte Definition von Skizzen für Profile und Quer-schnitte – die Grundlagen des MCAD. Daraus erzeugt er 3D-Bauteile, konstruiert Varianten mit Hilfe von Tabellen, automatisiert Geometrie über Gleichungen, fügt Normteile wie Schrauben und Wälzlager ein und setzt schließlich alles zu einer virtuellen, beweglichen Maschine zusammen. Hierbei lernt er, Teile im Zusammenhang einer Baugruppe zu kon-struieren. Auch die Ableitung normgerechter 2D-Zeichnungen sowie die Einrichtung automatischer Zeichnungsvorlagen werden ausführlich demonstriert. Auf der DVD befinden sich die Übungs- und Ergebnisdateien sämtlicher Beispiele. Mit ihrer Hilfe kann der Anwender sofort in jedes beliebige Kapitel einsteigen. Die Dateien wurden indes nicht nur in SolidWorks 2017 abgespeichert, sondern auch in den Vorversionen. Damit ist das Buch für alle Versionen seit 2004 voll verwendbar. Rezension zur dritten Auflage: „Das in der 3ten Auflage erschienene Buch verdient das Prädikat „herausragend“. Didaktisch und inhaltlich setzt es Maßstäbe, die Qualität der Ausführung ist bestechend. Selbstverständlich mit CD. Für jeden, der nicht im Umgang mit SolidWorks schon perfekt ist, ein Gewinn.“ -Prof. Dr.-Ing. Nicolas Sokianos, GfPMagazin 12/08
Release

AutoCAD 2015

Das Einsteigerseminar

Author: Detlef Ridder

Publisher: MITP-Verlags GmbH & Co. KG

ISBN: 3826676734

Category: TECHNOLOGY & ENGINEERING

Page: 448

View: 6916

Dieses Buch richtet sich an Einsteiger in die CAD-Konstruktion mit AutoCAD 2015 und ermöglicht eine schnelle und erfolgreiche Einarbeitung. Schritt für Schritt werden Sie mit der Bedienung des umfangreichen Programms vertraut gemacht – von der Oberfläche über die einzelnen Zeichenbefehle und Zeichenhilfen bis hin zur Bemaßung und zu 3D-Zeichnungen.
Release

C++ für Dummies

Author: Stephen R. Davis,Judith Muhr

Publisher: John Wiley & Sons

ISBN: 3527708340

Category: Computers

Page: 395

View: 846

Die Programmierung mit C++ muss nicht schwer sein. Mit diesem Buch werden Sie schon ab dem ersten Kapitel eigene Programme schreiben und die C++-Syntax von der Pike auf lernen, verstehen und anwenden. Anhand zahlreicher "Programmschnipsel" erklärt Ihnen Stephen Randy Davis, wie Sie Code zu Modulen zusammenfassen, die Sie immer wieder verwenden können und schon bald werden Ihnen auch Konzepte wie Zeiger, Vererbung oder Klassen kein Rätsel mehr sein.
Release

TensorFlow für Dummies

Author: Matthew Scarpino

Publisher: John Wiley & Sons

ISBN: 3527818960

Category: Computers

Page: 324

View: 9793

TensorFlow ist Googles herausragendes Werkzeug für das maschinelle Lernen, und dieses Buch macht es zugänglich, selbst wenn Sie bisher wenig über neuronale Netze und Deep Learning wissen. Sie erfahren, auf welchen Prinzipien TensorFlow basiert und wie Sie mit TensorFlow Anwendungen schreiben. Gleichzeitig lernen Sie die Konzepte des maschinellen Lernens kennen. Wenn Sie Softwareentwickler sind und TensorFlow in Zukunft einsetzen möchten, dann ist dieses Buch der richtige Einstieg für Sie. Greifen Sie auch zu, wenn Sie einfach mehr über das maschinelle Lernen erfahren wollen.
Release

Ingenieurwerkstoffe

Einführung in ihre Eigenschaften und Anwendungen

Author: Michael F. Ashby,David R.H. Jones

Publisher: Springer-Verlag

ISBN: 3642932924

Category: Science

Page: 334

View: 2944

Release

SolidWorks 2005

Skizzen, Bauteile, Baugruppen

Author: Harald Vogel

Publisher: N.A

ISBN: 9783446403390

Category:

Page: 199

View: 8448

Release

Wie ich die Dinge geregelt kriege

Selbstmanagement für den Alltag

Author: David Allen

Publisher: Piper ebooks

ISBN: 3492972314

Category: Self-Help

Page: 432

View: 7499

Eigentlich sollte man längst bei einem Termin sein, doch dann klingelt das Handy und das E-Mail-Postfach quillt auch schon wieder über. Für Sport und Erholung bleibt immer weniger Zeit und am Ende resigniert man ausgebrannt, unproduktiv und völlig gestresst. Doch das muss nicht sein. Denn je entspannter wir sind, desto kreativer und produktiver werden wir. Mit David Allens einfacher und anwendungsorientierter Methode wird beides wieder möglich: effizient zu arbeiten und die Freude am Leben zurückzugewinnen.
Release